Continuing on the jail break, you are in a security office in Doors and Rooms 2 Chapter 2 Stage 19. In order to escape, you will need to hack into the computer system and access the data base. Please leave comments if you are still stuck or confused after reading our guide. Thank you!

We have divided the walkthrough guide into 3 sections to help you backtrack if you have already passed the stage. If you are aiming for 100% three star completion the first time around, simply follow the steps in order.
Main Escape | Bonus Star | Quiz Solution

DoorsandRooms2 ch2 stage19 walkthrough

Main Escape

1. ID Card: Grab an ID Card from the desk.
2. Drawer: Open the drawer to get a faucet handle and a bottle of glue.
DoorsandRooms2 ch2 stage19 drawer
3. Wire: Pick up a piece of wire under the sink inside the metal cover.
4. Drain: Use the wire to get a key from the drain. Separate the key from the wire using dismantle.
DoorsandRooms2 ch2 stage19 get key DoorsandRooms2 ch2 stage19 dismantle wire
5. Cabinet: Open cabinet B-105 with the key. Grab a crumbled paper ball and a pair of scissors.
DoorsandRooms2 ch2 stage19 cabinet DoorsandRooms2 ch2 stage19 get scissors
6. Faucet: Place the handle on the faucet. Turn on the hot water. The steam reveals a puzzle on the mirror above.

DoorsandRooms2 ch2 stage19 faucet

Check your inventory to dismantle the crumbled paper ball. You will get a hint and a dice.
DoorsandRooms2 ch2 stage19 paper DoorsandRooms2 ch2 stage19 hint
The hint 62156 gives you an idea on how to decipher the puzzle by reconstructing the dice. Imagine that you are following a path along the numbers on the dice. You start with 6 at the top, fold it once to get 2, fold it again to get 1 at the bottom, wrap it back to the side at 5, then end it with 6 at the top.

Use the same logic to solve the dice puzzle from the mirror, the only exception is that the sequence is longer this time.

You start with 6, travel to 2 like how it is shown by the hint.
You can only travel to “3” between 2 and 1 on the bottom.
Then you only have “4” between 1 and 5.
Finally, complete the sequence going from 5 to 6.

Put together the path and you get missing numbers as 23145.
DoorsandRooms2 ch2 stage19 dice DoorsandRooms2 ch2 stage19 mirror
7. Computer: Enter the password 23145 to access the computer. Open the file called “BradBellick.file”. Print the page.
DoorsandRooms2 ch2 stage19 computer DoorsandRooms2 ch2 stage19 load file

DoorsandRooms2 ch2 stage19 print DoorsandRooms2 ch2 stage19 close
8. Printer: Go and reach the printer. Take the printed page. Use the scissors to cut out the fingerprint.
DoorsandRooms2 ch2 stage19 printer DoorsandRooms2 ch2 stage19 use scissors

Put some glue on the ID Card by combining them. Lastly, combine the glued ID card with the fingerprint cutout.
DoorsandRooms2 ch2 stage19 use glue DoorsandRooms2 ch2 stage19 fingerprint

DoorsandRooms2 ch2 stage19 id card
9. Door: Insert the finished ID Card into the card key slot. The door unlocks for you to exit the room.
DoorsandRooms2 ch2 stage19 insert key card DoorsandRooms2 ch2 stage19 door open

DoorsandRooms2 ch2 stage19 escaped

Bonus

B1. From the computer monitor screen. Tap on “LOAD” button at the bottom of the screen. Open the file “Star.file” and click “PRINT”.
DoorsandRooms2 ch2 stage19 load DoorsandRooms2 ch2 stage19 star file

DoorsandRooms2 ch2 stage19 print star DoorsandRooms2 ch2 stage19 close star
B2. Retrieve the printed page from the printer. You have found the bonus star!
DoorsandRooms2 ch2 stage19 printer star

Quiz

Q1. Locate the notebook on the floor next to the door. Your are given the hint: X=??????.
Q2. Take a look at the drain, notice that the metal cover is actually placed incorrectly. “Imagine” to change the orientation and combine the scribbles on the top-right corner and bottom -left corner. You will get password: 376592 from the combined markings. Use the password to complete the quiz!
DoorsandRooms2 ch2 stage19 drain quiz DoorsandRooms2 ch2 stage19 quiz


Comments

Chapter 2 Stage 19 | Doors & Rooms 2 — 14 Comments

  1. I entered 2 3 1 4 5 into the computer and opened Brad’s file but it says “complete” not “print” Same for the star. What do I do?

Leave a Reply

Your email address will not be published.